Dremel 6.4mm Glass Drill Bit

Drill Bit and Bit Holder "Quick Drill" Set of 6

Drilling and screwdriving without having to change the drill bit? The ?Quick Drill? 2 in 1 drill bit holder will enable you do to this.Â After doing a drilling job, release the bracket by pulling it down and turn the spindle so you can access the other end.Â Secure the bracket again and off you go.Â This will save time and effort. The ?Quick Drill? set consists of 6 pieces in total, and h...

HSS Metal twist drill bit 6.8 mm Bosch 2609255076 Total length 109 mm cobalt DIN 338 Cylinder shank 1 pc(s)

Metal drill bits HSS-Co, DIN 338. The expert for hard, tough steel. A precision-ground, right-hand cutting twist drill bit made of high speed steel, ground from solid metal. Safe pilot drilling without pre-punching and high true-running precision make this drill bit stand out. Suitable for alloyed and non-alloyed steel, stainless steel (V2A/V4A) and cast iron. Also available as a set. Only use wit...

HSS Metal twist drill bit 11 mm Bosch 2609255084 Total length 142 mm cobalt DIN 338 Cylinder shank 1 pc(s)

Metal drill bits HSS-Co, DIN 338. The expert for hard, tough steel. A precision-ground, right-hand cutting twist drill bit made of high speed steel, ground from solid metal. Safe pilot drilling without pre-punching and high true-running precision make this drill bit stand out. Suitable for alloyed and non-alloyed steel, stainless steel (V2A/V4A) and cast iron. Also available as a set. Only use wit...

HSS Double-end drill bit 4.8 mm Bosch 2608597592 Total length 62 mm cut Cylinder shank 10 pc(s)

Suitable for many trade and industrial applications in steel, non-ferrous metals and plastics. For use with hand-held drills (suitable for cordless tools) and in drill stands or pillar drills, especially for car body work and metal machining (e.g. rivet hole or thread hole drilling). With double lifetime due to two drill bit tips and flutes. Split point drill tip for drilling without pre-punching....

HSS Double-end drill bit 3.1 mm Bosch 2608597583 Total length 49 mm cut Cylinder shank 10 pc(s)

Suitable for many trade and industrial applications in steel, non-ferrous metals and plastics. For use with hand-held drills (suitable for cordless tools) and in drill stands or pillar drills, especially for car body work and metal machining (e.g. rivet hole or thread hole drilling). With double lifetime due to two drill bit tips and flutes. Split point drill tip for drilling without pre-punching....

HSS Metal twist drill bit 2.5 mm Bosch 2609255064 Total length 57 mm cobalt DIN 338 Cylinder shank 1 pc(s)

Metal drill bits HSS-Co, DIN 338. The expert for hard, tough steel. A precision-ground, right-hand cutting twist drill bit made of high speed steel, ground from solid metal. Safe pilot drilling without pre-punching and high true-running precision make this drill bit stand out. Suitable for alloyed and non-alloyed steel, stainless steel (V2A/V4A) and cast iron. Also available as a set. Only use wit...

HSS Metal twist drill bit 3 mm Bosch 2609255065 Total length 61 mm cobalt DIN 338 Cylinder shank 1 pc(s)

Metal drill bits HSS-Co, DIN 338. The expert for hard, tough steel. A precision-ground, right-hand cutting twist drill bit made of high speed steel, ground from solid metal. Safe pilot drilling without pre-punching and high true-running precision make this drill bit stand out. Suitable for alloyed and non-alloyed steel, stainless steel (V2A/V4A) and cast iron. Also available as a set. Only use wit...

HSS Metal twist drill bit 10 mm Bosch 2609255083 Total length 133 mm cobalt DIN 338 Cylinder shank 1 pc(s)

Metal drill bits HSS-Co, DIN 338. The expert for hard, tough steel. A precision-ground, right-hand cutting twist drill bit made of high speed steel, ground from solid metal. Safe pilot drilling without pre-punching and high true-running precision make this drill bit stand out. Suitable for alloyed and non-alloyed steel, stainless steel (V2A/V4A) and cast iron. Also available as a set. Only use wit...

Sealey DB040CB HSS Cobalt Drill Bit 4mm Pack Of 10

Sealey HSS Cobalt Drill Bits - Fully Ground 1-13mm - Sealey DB040CB, This drill bit from Sealey is a fully ground HSS cobalt drill bit manufactured to DIN 338. The 5% cobalt gives increased heat hardness which helps extend the life of the drill bit, while the 135° split point is self-centring, helping to reduce thrust and aids an easier penetration. Another feature is the efficient clog-free swar...

HSS Metal twist drill bit set 5-piece 2 mm, 3 mm, 4 mm, 5 mm, 6 mm Bosch 2609255127 cut DIN 338 1/4" (6.3 mm) 1 Set

Metal drill bit set HSS-G with 1/4" hex shank manufactured to DIN 312 -E .3. Precise metal drill bit for direct insertion in 1/4" hexagonal fitting. This makes drilling with the cordless screwdriver really easy without having to change the screwdriver bit. Fast drilling rate and self-centring split point drill tip with high true-running precision. Suitable for metal, cast iron, cast steel and h...

Sealey DB040FG HSS Drill Bit 4mm Pack Of 10

Sealey HSS Drill Bits - Fully Ground 1-13mm - Sealey DB040FG, This drill bit from Sealey is a fully ground HSS drill bit manufactured to DIN 338. The 135° split point is self-centring, which helps to reduce thrust, friction and heat and aids an easier penetration. Efficient clog-free swarf clearance, making it suitable for use with both hand and pillar drills, particularly on high carbon steels a...

HSS Metal twist drill bit 2 mm Bosch 2609255063 Total length 49 mm cobalt DIN 338 Cylinder shank 1 pc(s)

Metal drill bits HSS-Co, DIN 338. The expert for hard, tough steel. A precision-ground, right-hand cutting twist drill bit made of high speed steel, ground from solid metal. Safe pilot drilling without pre-punching and high true-running precision make this drill bit stand out. Suitable for alloyed and non-alloyed steel, stainless steel (V2A/V4A) and cast iron. Also available as a set. Only use wit...

HSS Double-end drill bit 3 mm Bosch 2608597582 Total length 46 mm cut Cylinder shank 10 pc(s)

Suitable for many trade and industrial applications in steel, non-ferrous metals and plastics. For use with hand-held drills (suitable for cordless tools) and in drill stands or pillar drills, especially for car body work and metal machining (e.g. rivet hole or thread hole drilling). With double lifetime due to two drill bit tips and flutes. Split point drill tip for drilling without pre-punching....

HSS Metal twist drill bit 7 mm Bosch 2609255077 Total length 109 mm cobalt DIN 338 Cylinder shank 1 pc(s)

Metal drill bits HSS-Co, DIN 338. The expert for hard, tough steel. A precision-ground, right-hand cutting twist drill bit made of high speed steel, ground from solid metal. Safe pilot drilling without pre-punching and high true-running precision make this drill bit stand out. Suitable for alloyed and non-alloyed steel, stainless steel (V2A/V4A) and cast iron. Also available as a set. Only use wit...

HSS Metal twist drill bit 3.2 mm Bosch 2609255066 Total length 65 mm cobalt DIN 338 Cylinder shank 1 pc(s)

Metal drill bits HSS-Co, DIN 338. The expert for hard, tough steel. A precision-ground, right-hand cutting twist drill bit made of high speed steel, ground from solid metal. Safe pilot drilling without pre-punching and high true-running precision make this drill bit stand out. Suitable for alloyed and non-alloyed steel, stainless steel (V2A/V4A) and cast iron. Also available as a set. Only use wit...

HSS Double-end drill bit 5 mm Bosch 2608597594 Total length 62 mm cut Cylinder shank 10 pc(s)

Suitable for many trade and industrial applications in steel, non-ferrous metals and plastics. For use with hand-held drills (suitable for cordless tools) and in drill stands or pillar drills, especially for car body work and metal machining (e.g. rivet hole or thread hole drilling). With double lifetime due to two drill bit tips and flutes. Split point drill tip for drilling without pre-punching....

HSS Double-end drill bit 4.5 mm Bosch 2608597591 Total length 58 mm cut Cylinder shank 10 pc(s)

Suitable for many trade and industrial applications in steel, non-ferrous metals and plastics. For use with hand-held drills (suitable for cordless tools) and in drill stands or pillar drills, especially for car body work and metal machining (e.g. rivet hole or thread hole drilling). With double lifetime due to two drill bit tips and flutes. Split point drill tip for drilling without pre-punching....

HSS Metal twist drill bit 6 mm Bosch 2609255074 Total length 93 mm cobalt DIN 338 Cylinder shank 1 pc(s)

Metal drill bits HSS-Co, DIN 338. The expert for hard, tough steel. A precision-ground, right-hand cutting twist drill bit made of high speed steel, ground from solid metal. Safe pilot drilling without pre-punching and high true-running precision make this drill bit stand out. Suitable for alloyed and non-alloyed steel, stainless steel (V2A/V4A) and cast iron. Also available as a set. Only use wit...

HSS Metal twist drill bit 9 mm Bosch 2609255081 Total length 117 mm cobalt DIN 338 Cylinder shank 1 pc(s)

Metal drill bits HSS-Co, DIN 338. The expert for hard, tough steel. A precision-ground, right-hand cutting twist drill bit made of high speed steel, ground from solid metal. Safe pilot drilling without pre-punching and high true-running precision make this drill bit stand out. Suitable for alloyed and non-alloyed steel, stainless steel (V2A/V4A) and cast iron. Also available as a set. Only use wit...

HSS Metal twist drill bit 4.2 mm Bosch 2609255069 Total length 75 mm cobalt DIN 338 Cylinder shank 1 pc(s)

Metal drill bits HSS-Co, DIN 338. The expert for hard, tough steel. A precision-ground, right-hand cutting twist drill bit made of high speed steel, ground from solid metal. Safe pilot drilling without pre-punching and high true-running precision make this drill bit stand out. Suitable for alloyed and non-alloyed steel, stainless steel (V2A/V4A) and cast iron. Also available as a set. Only use wit...

HSS Double-end drill bit 5.2 mm Bosch 2608597596 Total length 62 mm cut Cylinder shank 10 pc(s)

Suitable for many trade and industrial applications in steel, non-ferrous metals and plastics. For use with hand-held drills (suitable for cordless tools) and in drill stands or pillar drills, especially for car body work and metal machining (e.g. rivet hole or thread hole drilling). With double lifetime due to two drill bit tips and flutes. Split point drill tip for drilling without pre-punching....