F20-16 Floor Pillar Drill

HSS Double-end drill bit 5.5 mm Bosch 2608597597 Total length 66 mm cut Cylinder shank 10 pc(s)

Suitable for many trade and industrial applications in steel, non-ferrous metals and plastics. For use with hand-held drills (suitable for cordless tools) and in drill stands or pillar drills, especially for car body work and metal machining (e.g. rivet hole or thread hole drilling). With double lifetime due to two drill bit tips and flutes. Split point drill tip for drilling without pre-punching....

HSS Double-end drill bit 3.5 mm Bosch 2608597587 Total length 52 mm cut Cylinder shank 10 pc(s)

Suitable for many trade and industrial applications in steel, non-ferrous metals and plastics. For use with hand-held drills (suitable for cordless tools) and in drill stands or pillar drills, especially for car body work and metal machining (e.g. rivet hole or thread hole drilling). With double lifetime due to two drill bit tips and flutes. Split point drill tip for drilling without pre-punching....

Sealey DBI18FG HSS Drill Bit 1/8in Pack Of 10

Sealey HSS Drill Bits -Fully Ground 1/4 to 7/32in - Sealey DBI18FG, This drill bit from Sealey is a fully ground HSS drill bit manufactured to DIN 338. The 135° split point is self-centring, which helps to reduce thrust, friction and heat and aids an easier penetration. Efficient clog-free swarf clearance, making it suitable for use with both hand and pillar drills, particularly on high carbon st...

HSS Metal twist drill bit set 19-piece Bosch 2608587014 cobalt DIN 338 Cylinder shank 1 Set

Suitable for alloyed and non-alloyed steel up to a tensile strength of 1000 N/mm², stainless steel V2A/V4A, cast iron, cast steel, acid and heat-resistant steels. Precision drill bits that are resistant to heat and wear. For use in drill stands or in pillar drills. The HSS-Co drill bits are available in two qualities. The Topline drill bits are for the highest requirements and the standard drill ...

HSS Double-end drill bit 3.3 mm Bosch 2608597585 Total length 49 mm cut Cylinder shank 10 pc(s)

Suitable for many trade and industrial applications in steel, non-ferrous metals and plastics. For use with hand-held drills (suitable for cordless tools) and in drill stands or pillar drills, especially for car body work and metal machining (e.g. rivet hole or thread hole drilling). With double lifetime due to two drill bit tips and flutes. Split point drill tip for drilling without pre-punching....

HSS Double-end drill bit 3.2 mm Bosch 2608597584 Total length 49 mm cut Cylinder shank 10 pc(s)

Suitable for many trade and industrial applications in steel, non-ferrous metals and plastics. For use with hand-held drills (suitable for cordless tools) and in drill stands or pillar drills, especially for car body work and metal machining (e.g. rivet hole or thread hole drilling). With double lifetime due to two drill bit tips and flutes. Split point drill tip for drilling without pre-punching....

Sealey DB110FG HSS Drill Bit 11mm Pack Of 5

Sealey HSS Drill Bits - Fully Ground 1-13mm - Sealey DB110FG, This drill bit from Sealey is a fully ground HSS drill bit manufactured to DIN 338. The 135° split point is self-centring, which helps to reduce thrust, friction and heat and aids an easier penetration. Efficient clog-free swarf clearance, making it suitable for use with both hand and pillar drills, particularly on high carbon steels a...

HSS Metal twist drill bit set 25-piece Bosch 2608587018 cobalt DIN 338 Cylinder shank 1 Set

Suitable for alloyed and non-alloyed steel up to a tensile strength of 1000 N/mm², stainless steel V2A/V4A, cast iron, cast steel, acid and heat-resistant steels. Precision drill bits that are resistant to heat and wear. For use in drill stands or in pillar drills. The HSS-Co drill bits are available in two qualities. The Topline drill bits are for the highest requirements and the standard drill ...

HSS Double-end drill bit 4.8 mm Bosch 2608597592 Total length 62 mm cut Cylinder shank 10 pc(s)

Suitable for many trade and industrial applications in steel, non-ferrous metals and plastics. For use with hand-held drills (suitable for cordless tools) and in drill stands or pillar drills, especially for car body work and metal machining (e.g. rivet hole or thread hole drilling). With double lifetime due to two drill bit tips and flutes. Split point drill tip for drilling without pre-punching....

HSS Double-end drill bit 5.7 mm Bosch 2608597598 Total length 66 mm cut Cylinder shank 10 pc(s)

Suitable for many trade and industrial applications in steel, non-ferrous metals and plastics. For use with hand-held drills (suitable for cordless tools) and in drill stands or pillar drills, especially for car body work and metal machining (e.g. rivet hole or thread hole drilling). With double lifetime due to two drill bit tips and flutes. Split point drill tip for drilling without pre-punching....

HSS Double-end drill bit 2.5 mm Bosch 2608597581 Total length 43 mm cut Cylinder shank 10 pc(s)

Suitable for many trade and industrial applications in steel, non-ferrous metals and plastics. For use with hand-held drills (suitable for cordless tools) and in drill stands or pillar drills, especially for car body work and metal machining (e.g. rivet hole or thread hole drilling). With double lifetime due to two drill bit tips and flutes. Split point drill tip for drilling without pre-punching....

Sealey DB020FG HSS Drill Bit 2mm Pack Of 10

Sealey HSS Drill Bits - Fully Ground 1-13mm - Sealey DB020FG, This drill bit from Sealey is a fully ground HSS drill bit manufactured to DIN 338. The 135° split point is self-centring, which helps to reduce thrust, friction and heat and aids an easier penetration. Efficient clog-free swarf clearance, making it suitable for use with both hand and pillar drills, particularly on high carbon steels a...

Sealey DB095FG HSS Drill Bit 9.5mm Pack Of 10

Sealey HSS Drill Bits - Fully Ground 1-13mm - Sealey DB095FG, This drill bit from Sealey is a fully ground HSS drill bit manufactured to DIN 338. The 135° split point is self-centring, which helps to reduce thrust, friction and heat and aids an easier penetration. Efficient clog-free swarf clearance, making it suitable for use with both hand and pillar drills, particularly on high carbon steels a...

Sealey DB025FG HSS Drill Bit 2.5mm Pack Of 10

Sealey HSS Drill Bits - Fully Ground 1-13mm - Sealey DB025FG, This drill bit from Sealey is a fully ground HSS drill bit manufactured to DIN 338. The 135° split point is self-centring, which helps to reduce thrust, friction and heat and aids an easier penetration. Efficient clog-free swarf clearance, making it suitable for use with both hand and pillar drills, particularly on high carbon steels a...

Sealey DB100FG HSS Drill Bit 10mm Pack Of 5

Sealey HSS Drill Bits - Fully Ground 1-13mm - Sealey DB100FG, This drill bit from Sealey is a fully ground HSS drill bit manufactured to DIN 338. The 135° split point is self-centring, which helps to reduce thrust, friction and heat and aids an easier penetration. Efficient clog-free swarf clearance, making it suitable for use with both hand and pillar drills, particularly on high carbon steels a...

Sealey DB050FG HSS Drill Bit 5mm Pack Of 10

Sealey HSS Drill Bits - Fully Ground 1-13mm - Sealey DB050FG, This drill bit from Sealey is a fully ground HSS drill bit manufactured to DIN 338. The 135° split point is self-centring, which helps to reduce thrust, friction and heat and aids an easier penetration. Efficient clog-free swarf clearance, making it suitable for use with both hand and pillar drills, particularly on high carbon steels a...

Sealey DB010FG HSS Drill Bit 1mm Pack Of 10

Sealey HSS Drill Bits - Fully Ground 1-13mm - Sealey DB010FG, This drill bit from Sealey is a fully ground HSS drill bit manufactured to DIN 338. The 135° split point is self-centring, which helps to reduce thrust, friction and heat and aids an easier penetration. Efficient clog-free swarf clearance, making it suitable for use with both hand and pillar drills, particularly on high carbon steels a...

Sealey DBI14FG HSS Drill Bit 1/4in Pack Of 10

Sealey HSS Drill Bits -Fully Ground 1/4 to 7/32in - Sealey DBI14FG, This drill bit from Sealey is a fully ground HSS drill bit manufactured to DIN 338. The 135° split point is self-centring, which helps to reduce thrust, friction and heat and aids an easier penetration. Efficient clog-free swarf clearance, making it suitable for use with both hand and pillar drills, particularly on high carbon st...

Sealey DB030FG HSS Drill Bit 3mm Pack Of 10

Sealey HSS Drill Bits - Fully Ground 1-13mm - Sealey DB030FG, This drill bit from Sealey is a fully ground HSS drill bit manufactured to DIN 338. The 135° split point is self-centring, which helps to reduce thrust, friction and heat and aids an easier penetration. Efficient clog-free swarf clearance, making it suitable for use with both hand and pillar drills, particularly on high carbon steels a...

Sealey DB045FG HSS Drill Bit 4.5mm Pack Of 10

Sealey HSS Drill Bits - Fully Ground 1-13mm - Sealey DB045FG, This drill bit from Sealey is a fully ground HSS drill bit manufactured to DIN 338. The 135° split point is self-centring, which helps to reduce thrust, friction and heat and aids an easier penetration. Efficient clog-free swarf clearance, making it suitable for use with both hand and pillar drills, particularly on high carbon steels a...

Sealey DB040FG HSS Drill Bit 4mm Pack Of 10

Sealey HSS Drill Bits - Fully Ground 1-13mm - Sealey DB040FG, This drill bit from Sealey is a fully ground HSS drill bit manufactured to DIN 338. The 135° split point is self-centring, which helps to reduce thrust, friction and heat and aids an easier penetration. Efficient clog-free swarf clearance, making it suitable for use with both hand and pillar drills, particularly on high carbon steels a...