HSS Ground Metric Drill Bit Set 13 Piece

HSS Metal twist drill bit set 25-piece Bosch 2608587019 TiN DIN 338 Cylinder shank 1 Set

Suitable for alloyed and non-alloyed steel up to a tensile strength of 900 N/mm². Malleable cast iron, sintered iron, new silver, copper, bronze and hard plastics such as perspex. Enables up to 40% faster drilling than comparable drill bits with 118° drill bit tip and no split point. The lowest possible level of friction due to titanium-nitride coating, which effectively reduces friction deposit...

HSS Metal twist drill bit set 19-piece Bosch 2608587015 TiN DIN 338 Cylinder shank 1 Set

Suitable for alloyed and non-alloyed steel up to a tensile strength of 900 N/mm². Malleable cast iron, sintered iron, new silver, copper, bronze and hard plastics such as perspex. Enables up to 40% faster drilling than comparable drill bits with 118° drill bit tip and no split point. The lowest possible level of friction due to titanium-nitride coating, which effectively reduces friction deposit...

HSS Metal twist drill bit set 13-piece Bosch 2607010539 TiN Cylinder shank 1 Set

Suitable for alloyed and non-alloyed steel up to a tensile strength of 900 N/mm². Malleable cast iron, sintered iron, new silver, copper, bronze and hard plastics such as perspex. Enables up to 40% faster drilling than comparable drill bits with 118° drill bit tip and no split point. The lowest possible level of friction due to titanium-nitride coating, which effectively reduces friction deposit...

HSS Metal twist drill bit set 6-piece Bosch 2607010530 TiN DIN 338 Cylinder shank 1 Set

Suitable for alloyed and non-alloyed steel up to a tensile strength of 900 N/mm². Malleable cast iron, sintered iron, new silver, copper, bronze and hard plastics such as perspex. Enables up to 40% faster drilling than comparable drill bits with 118° drill bit tip and no split point. The lowest possible level of friction due to titanium-nitride coating, which effectively reduces friction deposit...

HSS Metal twist drill bit set 10-piece Bosch 2607010536 TiN DIN 338 Cylinder shank 1 Set

Suitable for alloyed and non-alloyed steel up to a tensile strength of 900 N/mm². Malleable cast iron, sintered iron, new silver, copper, bronze and hard plastics such as perspex. Enables up to 40% faster drilling than comparable drill bits with 118° drill bit tip and no split point. The lowest possible level of friction due to titanium-nitride coating, which effectively reduces friction deposit...

HSS Metal twist drill bit set 19-piece Bosch 2608587013 cut DIN 338 Cylinder shank 1 Set

Suitable for alloyed and non-alloyed steel up to a tensile strength of 900 N/mm², cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals, hard plastics. Precision-ground HSS-G drill bit enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with a chisel edge. Self-centring split point drill tip means there is no need to...

HSS Metal twist drill bit set 19-piece Bosch 2607018726 cut DIN 338 Cylinder shank 1 Set

Suitable for alloyed and non-alloyed steel up to a tensile strength of 900 N/mm², cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals, hard plastics. Precision-ground HSS-G drill bit enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with a chisel edge. Self-centring split point drill tip means there is no need to...

HSS Metal twist drill bit set 25-piece Bosch 2607018727 cut DIN 338 Cylinder shank 1 Set

Suitable for alloyed and non-alloyed steel up to a tensile strength of 900 N/mm², cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals, hard plastics. Precision-ground HSS-G drill bit enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with a chisel edge. Self-centring split point drill tip means there is no need to...

HSS Metal twist drill bit set 5-piece 2 mm, 3 mm, 4 mm, 5 mm, 6 mm Bosch 2609255127 cut DIN 338 1/4" (6.3 mm) 1 Set

Metal drill bit set HSS-G with 1/4" hex shank manufactured to DIN 312 -E .3. Precise metal drill bit for direct insertion in 1/4" hexagonal fitting. This makes drilling with the cordless screwdriver really easy without having to change the screwdriver bit. Fast drilling rate and self-centring split point drill tip with high true-running precision. Suitable for metal, cast iron, cast steel and h...

HSS Metal twist drill bit set 19-piece Bosch 2608587014 cobalt DIN 338 Cylinder shank 1 Set

Suitable for alloyed and non-alloyed steel up to a tensile strength of 1000 N/mm², stainless steel V2A/V4A, cast iron, cast steel, acid and heat-resistant steels. Precision drill bits that are resistant to heat and wear. For use in drill stands or in pillar drills. The HSS-Co drill bits are available in two qualities. The Topline drill bits are for the highest requirements and the standard drill ...

HSS Metal twist drill bit set 25-piece Bosch 2608587018 cobalt DIN 338 Cylinder shank 1 Set

Suitable for alloyed and non-alloyed steel up to a tensile strength of 1000 N/mm², stainless steel V2A/V4A, cast iron, cast steel, acid and heat-resistant steels. Precision drill bits that are resistant to heat and wear. For use in drill stands or in pillar drills. The HSS-Co drill bits are available in two qualities. The Topline drill bits are for the highest requirements and the standard drill ...

HSS Metal twist drill bit set 13-piece Bosch 2607010538 cut DIN 338 Cylinder shank 1 Set

Suitable for alloyed and non-alloyed steel up to a tensile strength of 900 N/mm², cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals, hard plastics. Precision-ground HSS-G drill bit enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with a chisel edge. Self-centring split point drill tip means there is no need to...

HSS Metal twist drill bit set 18-piece Bosch 2607019578 cut DIN 338 Cylinder shank 1 Set

Suitable for alloyed and non-alloyed steel up to a tensile strength of 900 N/mm², cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals, hard plastics. Precision-ground HSS-G drill bit enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with a chisel edge. Self-centring split point drill tip means there is no need to...

HSS Metal twist drill bit set 19-piece Bosch 2607018361 cut DIN 338 Cylinder shank 1 Set

Suitable for alloyed and non-alloyed steel up to a tensile strength of 900 N/mm², cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals, hard plastics. Precision-ground HSS-G drill bit enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with a chisel edge. Self-centring split point drill tip means there is no need to...

HSS Metal twist drill bit set 10-piece Bosch 2607010535 cut DIN 338 Cylinder shank 1 Set

Suitable for alloyed and non-alloyed steel up to a tensile strength of 900 N/mm², cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals, hard plastics. Precision-ground HSS-G drill bit enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with a chisel edge. Self-centring split point drill tip means there is no need to...

HSS Metal twist drill bit set 6-piece Bosch 2607010529 cut DIN 338 Cylinder shank 1 Set

Suitable for alloyed and non-alloyed steel up to a tensile strength of 900 N/mm², cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals, hard plastics. Precision-ground HSS-G drill bit enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with a chisel edge. Self-centring split point drill tip means there is no need to...

HSS Metal twist drill bit set 5-piece Bosch 2608595517 cut DIN 338 1/4" (6.3 mm) 1 Set

Suitable for alloyed and non-alloyed steel up to a tensile strength of 900 N/mm², cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals, hard plastics. Precision-ground HSS-G drill bit enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with a chisel edge. Self-centring split point drill tip means there is no need to...

HSS Metal twist drill bit set 25-piece Bosch 2607018725 rolled DIN 338 Cylinder shank 1 Set

Suitable for alloyed and non-alloyed steel up to a tensile strength of 900 N/mm², non-ferrous metals, cast iron, hard plastics. High elasticity due to low-heat shaping manufacturing process. Low risk of breakage especially when drilling with diameters smaller than 6 mm. Spiral flute with oxide coating for rapid chip removal. Long lifetimes due to tough core thickness and distinct hardness with...

HSS Metal twist drill bit set 19-piece Bosch 2607018354 rolled DIN 338 Cylinder shank 1 Set

Suitable for alloyed and non-alloyed steel up to a tensile strength of 900 N/mm², non-ferrous metals, cast iron, hard plastics. High elasticity due to low-heat shaping manufacturing process. Low risk of breakage especially when drilling with diameters smaller than 6 mm. Spiral flute with oxide coating for rapid chip removal. Long lifetimes due to tough core thickness and distinct hardness with...

HSS Metal twist drill bit set 13-piece Bosch 2607019926 cobalt DIN 338 Cylinder shank 1 Set

Suitable for alloyed and non-alloyed steel up to a tensile strength of 1000 N/mm², stainless steel V2A/V4A, cast iron, cast steel, acid and heat-resistant steels. Precision drill bits that are resistant to heat and wear. For use in drill stands or in pillar drills. The HSS-Co drill bits are available in two qualities. The Topline drill bits are for the highest requirements and the standard drill ...

HSS Metal twist drill bit set 10-piece Bosch 2607019925 cobalt DIN 338 Cylinder shank 1 Set

Suitable for alloyed and non-alloyed steel up to a tensile strength of 1000 N/mm², stainless steel V2A/V4A, cast iron, cast steel, acid and heat-resistant steels. Precision drill bits that are resistant to heat and wear. For use in drill stands or in pillar drills. The HSS-Co drill bits are available in two qualities. The Topline drill bits are for the highest requirements and the standard drill ...