Rapid Rivets Stainless Steel Including Drill Bit, 4 x 14 mm,

Drill Bit and Bit Holder "Quick Drill" Set of 6

Drilling and screwdriving without having to change the drill bit? The ?Quick Drill? 2 in 1 drill bit holder will enable you do to this.Â After doing a drilling job, release the bracket by pulling it down and turn the spindle so you can access the other end.Â Secure the bracket again and off you go.Â This will save time and effort. The ?Quick Drill? set consists of 6 pieces in total, and h...

HSS Metal twist drill bit 9.5 mm Bosch 2607018434 Total length 125 mm rolled DIN 338 Cylinder shank 10 pc(s)

Suitable for alloyed and non-alloyed steel up to a tensile strength of 900 N/mm², non-ferrous metals, cast iron, hard plastics. High elasticity due to low-heat shaping manufacturing process. Low risk of breakage especially when drilling with diameters smaller than 6 mm. Spiral flute with oxide coating for rapid chip removal. Long lifetimes due to tough core thickness and distinct hardness with...

HSS Metal twist drill bit 2.9 mm Bosch 2608596564 Total length 61 mm rolled DIN 338 Cylinder shank 10 pc(s)

Suitable for alloyed and non-alloyed steel up to a tensile strength of 900 N/mm², non-ferrous metals, cast iron, hard plastics. High elasticity due to low-heat shaping manufacturing process. Low risk of breakage especially when drilling with diameters smaller than 6 mm. Spiral flute with oxide coating for rapid chip removal. Long lifetimes due to tough core thickness and distinct hardness with...

HSS Metal twist drill bit 3.3 mm Bosch 2607018411 Total length 65 mm rolled DIN 338 Cylinder shank 10 pc(s)

Suitable for alloyed and non-alloyed steel up to a tensile strength of 900 N/mm², non-ferrous metals, cast iron, hard plastics. High elasticity due to low-heat shaping manufacturing process. Low risk of breakage especially when drilling with diameters smaller than 6 mm. Spiral flute with oxide coating for rapid chip removal. Long lifetimes due to tough core thickness and distinct hardness with...

HSS Metal twist drill bit 9.8 mm Bosch 2608596618 Total length 133 mm rolled DIN 338 Cylinder shank 10 pc(s)

Suitable for alloyed and non-alloyed steel up to a tensile strength of 900 N/mm², non-ferrous metals, cast iron, hard plastics. High elasticity due to low-heat shaping manufacturing process. Low risk of breakage especially when drilling with diameters smaller than 6 mm. Spiral flute with oxide coating for rapid chip removal. Long lifetimes due to tough core thickness and distinct hardness with...

HSS Metal twist drill bit 10.4 mm Bosch 2608596624 Total length 133 mm rolled DIN 338 Cylinder shank 5 pc(s)

Suitable for alloyed and non-alloyed steel up to a tensile strength of 900 N/mm², non-ferrous metals, cast iron, hard plastics. High elasticity due to low-heat shaping manufacturing process. Low risk of breakage especially when drilling with diameters smaller than 6 mm. Spiral flute with oxide coating for rapid chip removal. Long lifetimes due to tough core thickness and distinct hardness with...

HSS Metal twist drill bit 4.8 mm Bosch 2609255071 Total length 86 mm cobalt DIN 338 Cylinder shank 1 pc(s)

Metal drill bits HSS-Co, DIN 338. The expert for hard, tough steel. A precision-ground, right-hand cutting twist drill bit made of high speed steel, ground from solid metal. Safe pilot drilling without pre-punching and high true-running precision make this drill bit stand out. Suitable for alloyed and non-alloyed steel, stainless steel (V2A/V4A) and cast iron. Also available as a set. Only use wit...

HSS Metal twist drill bit 13 mm Bosch 2609255086 Total length 151 mm cobalt DIN 338 Cylinder shank 1 pc(s)

Metal drill bits HSS-Co, DIN 338. The expert for hard, tough steel. A precision-ground, right-hand cutting twist drill bit made of high speed steel, ground from solid metal. Safe pilot drilling without pre-punching and high true-running precision make this drill bit stand out. Suitable for alloyed and non-alloyed steel, stainless steel (V2A/V4A) and cast iron. Also available as a set. Only use wit...

HSS Metal twist drill bit 4.5 mm Bosch 2609255070 Total length 80 mm cobalt DIN 338 Cylinder shank 1 pc(s)

Metal drill bits HSS-Co, DIN 338. The expert for hard, tough steel. A precision-ground, right-hand cutting twist drill bit made of high speed steel, ground from solid metal. Safe pilot drilling without pre-punching and high true-running precision make this drill bit stand out. Suitable for alloyed and non-alloyed steel, stainless steel (V2A/V4A) and cast iron. Also available as a set. Only use wit...

HSS Metal twist drill bit 5.5 mm Bosch 2609255073 Total length 93 mm cobalt DIN 338 Cylinder shank 1 pc(s)

Metal drill bits HSS-Co, DIN 338. The expert for hard, tough steel. A precision-ground, right-hand cutting twist drill bit made of high speed steel, ground from solid metal. Safe pilot drilling without pre-punching and high true-running precision make this drill bit stand out. Suitable for alloyed and non-alloyed steel, stainless steel (V2A/V4A) and cast iron. Also available as a set. Only use wit...

HSS Metal twist drill bit 7.5 mm Bosch 2609255078 Total length 109 mm cobalt DIN 338 Cylinder shank 1 pc(s)

Metal drill bits HSS-Co, DIN 338. The expert for hard, tough steel. A precision-ground, right-hand cutting twist drill bit made of high speed steel, ground from solid metal. Safe pilot drilling without pre-punching and high true-running precision make this drill bit stand out. Suitable for alloyed and non-alloyed steel, stainless steel (V2A/V4A) and cast iron. Also available as a set. Only use wit...

HSS Metal twist drill bit 4 mm Bosch 2609255068 Total length 75 mm cobalt DIN 338 Cylinder shank 1 pc(s)

Metal drill bits HSS-Co, DIN 338. The expert for hard, tough steel. A precision-ground, right-hand cutting twist drill bit made of high speed steel, ground from solid metal. Safe pilot drilling without pre-punching and high true-running precision make this drill bit stand out. Suitable for alloyed and non-alloyed steel, stainless steel (V2A/V4A) and cast iron. Also available as a set. Only use wit...

HSS Metal twist drill bit set 25-piece Bosch 2608587018 cobalt DIN 338 Cylinder shank 1 Set

Suitable for alloyed and non-alloyed steel up to a tensile strength of 1000 N/mm², stainless steel V2A/V4A, cast iron, cast steel, acid and heat-resistant steels. Precision drill bits that are resistant to heat and wear. For use in drill stands or in pillar drills. The HSS-Co drill bits are available in two qualities. The Topline drill bits are for the highest requirements and the standard drill ...

HSS Metal twist drill bit 6.5 mm Bosch 2609255075 Total length 101 mm cobalt DIN 338 Cylinder shank 1 pc(s)

Metal drill bits HSS-Co, DIN 338. The expert for hard, tough steel. A precision-ground, right-hand cutting twist drill bit made of high speed steel, ground from solid metal. Safe pilot drilling without pre-punching and high true-running precision make this drill bit stand out. Suitable for alloyed and non-alloyed steel, stainless steel (V2A/V4A) and cast iron. Also available as a set. Only use wit...

HSS Metal twist drill bit 5 mm Bosch 2609255072 Total length 86 mm cobalt DIN 338 Cylinder shank 1 pc(s)

Metal drill bits HSS-Co, DIN 338. The expert for hard, tough steel. A precision-ground, right-hand cutting twist drill bit made of high speed steel, ground from solid metal. Safe pilot drilling without pre-punching and high true-running precision make this drill bit stand out. Suitable for alloyed and non-alloyed steel, stainless steel (V2A/V4A) and cast iron. Also available as a set. Only use wit...

HSS Metal twist drill bit 8.5 mm Bosch 2609255080 Total length 117 mm cobalt DIN 338 Cylinder shank 1 pc(s)

Metal drill bits HSS-Co, DIN 338. The expert for hard, tough steel. A precision-ground, right-hand cutting twist drill bit made of high speed steel, ground from solid metal. Safe pilot drilling without pre-punching and high true-running precision make this drill bit stand out. Suitable for alloyed and non-alloyed steel, stainless steel (V2A/V4A) and cast iron. Also available as a set. Only use wit...

HSS Metal twist drill bit 12 mm Bosch 2609255085 Total length 151 mm cobalt DIN 338 Cylinder shank 1 pc(s)

Metal drill bits HSS-Co, DIN 338. The expert for hard, tough steel. A precision-ground, right-hand cutting twist drill bit made of high speed steel, ground from solid metal. Safe pilot drilling without pre-punching and high true-running precision make this drill bit stand out. Suitable for alloyed and non-alloyed steel, stainless steel (V2A/V4A) and cast iron. Also available as a set. Only use wit...

HSS Metal twist drill bit 4.2 mm Bosch 2609255069 Total length 75 mm cobalt DIN 338 Cylinder shank 1 pc(s)

Metal drill bits HSS-Co, DIN 338. The expert for hard, tough steel. A precision-ground, right-hand cutting twist drill bit made of high speed steel, ground from solid metal. Safe pilot drilling without pre-punching and high true-running precision make this drill bit stand out. Suitable for alloyed and non-alloyed steel, stainless steel (V2A/V4A) and cast iron. Also available as a set. Only use wit...

HSS Metal twist drill bit 11 mm Bosch 2609255084 Total length 142 mm cobalt DIN 338 Cylinder shank 1 pc(s)

Metal drill bits HSS-Co, DIN 338. The expert for hard, tough steel. A precision-ground, right-hand cutting twist drill bit made of high speed steel, ground from solid metal. Safe pilot drilling without pre-punching and high true-running precision make this drill bit stand out. Suitable for alloyed and non-alloyed steel, stainless steel (V2A/V4A) and cast iron. Also available as a set. Only use wit...

HSS Metal twist drill bit 6.8 mm Bosch 2609255076 Total length 109 mm cobalt DIN 338 Cylinder shank 1 pc(s)

Metal drill bits HSS-Co, DIN 338. The expert for hard, tough steel. A precision-ground, right-hand cutting twist drill bit made of high speed steel, ground from solid metal. Safe pilot drilling without pre-punching and high true-running precision make this drill bit stand out. Suitable for alloyed and non-alloyed steel, stainless steel (V2A/V4A) and cast iron. Also available as a set. Only use wit...

HSS Metal twist drill bit 7 mm Bosch 2609255077 Total length 109 mm cobalt DIN 338 Cylinder shank 1 pc(s)

Metal drill bits HSS-Co, DIN 338. The expert for hard, tough steel. A precision-ground, right-hand cutting twist drill bit made of high speed steel, ground from solid metal. Safe pilot drilling without pre-punching and high true-running precision make this drill bit stand out. Suitable for alloyed and non-alloyed steel, stainless steel (V2A/V4A) and cast iron. Also available as a set. Only use wit...

Rapid Rivets Stainless Steel Including Drill Bit, 4 X 14 Mm, 5000